Quick Answer: Is It Bad To Use A Higher Watt Charger?

Does higher wattage charge faster?

But to reiterate the point from Wired’s article, it’s a myth that you will reduce phone battery life or blow up your phone by charging at a higher wattage than its standard charger offers.

Newer, higher wattage chargers simply speed up the charging process..

Can I use a 90 watt charger on a 120 watt laptop?

You should not use a 90 Watt brick if you need a 120 Watt brick. While I talked about charging currents, The max output requirement is based on Charging current required by a depleted battery pak + Operating current required by the laptop under full load.

Can I use a higher wattage charger for my phone?

YES, you can use any power charger for your mobile, BUT, it will only work if the charger output is 5volts. Charger output anything other than 5 volts will damage and burn your phone. Like if you use 9v or 12 volts.

Is Fast charging bad for battery?

Fast-charging won’t damage your battery Samsung will sell you an extra-speedy 45-watt charger for $50. Unless there’s some technical flaw with your battery or charger electronics, however, using a fast charger won’t do your phone’s battery any long-term damage.

Can I use a 45w charger instead of 90w?

If the output voltage is the same, you can use a 90W charger on a 45W laptop BUT cannot use a 45W charger on a 90W laptop. On the condition of same voltage, laptops and other devices will never overpowered. The amps you saw is the maximum one adapter is capable of, not the rated current.

What wattage is fast charging?

Standard chargers that come with iPhones and older Android phones carry 1 amp of current and put out 5 watts of power. New rapid chargers with technology such as Quick Charge support 2 amps and 12 watts or more, potentially charging your phone up to four times faster.

Can I use a 65 watt charger on a 45 watt laptop?

As long as it is the same voltage and connector type you can use a higher watt adapter. It will charge the battery a bit faster but other than and the size of the brick you will see no difference. The laptop will only draw the current it needs while running.

Can I use a 65 watt charger on a 90 watt laptop?

Yes, you can use a 90 watt ac adapter, a.k.a power charger, for your 65 watt-compatible laptop. It will actually charge your battery faster.

Can I use a 60w charger instead of 45w?

You can always use an adapter that has a higher power rating than is required as long as the voltage rating is the same. … Power adapters for Intel-based Apple notebooks are available in 45W, 60W, and 85W varieties.

Do I need a 60w or 85w charger?

You can charge using a higher wattage than is permitted, but you should not use a lower wattage. For instance, the MacBook Pro 13 inch uses a 60W MagSafe, but you can use an 85W MagSafe to charge or power it (although it will not charge any faster).

Can I use 60w charger instead of 85w?

Yes, with a caveat. The 85W adapter can be used inconsequentially with both models. It will provide ample power to both the MacBook Pro and MacBook, and will not damage the latter despite a higher-than-necessary wattage. … Note, however, that the 85W adapter will not charge a MacBook any faster than the 60W adapter.

Can I use a 19v charger on a 19.5 V laptop?

Voltage: 19.5V and 19V is a relatively small voltage difference. It is most probably safe to use as long as: The current of the charger is the same or higher than that of the laptop. … The output power (Amps * Volts) of the original and the new charger differs in 0.6 Watts, the 19.5V charger having more output power.

Is 60w enough to charge MacBook Pro?

In general, 27W is enough to maintain or slightly recharge the battery when the computer is not under load and 60W is enough to recharge the battery even when the computer is under moderate load. For more details, see the diagrams below and check out our test results when recharging a MacBook Pro.

What happens if amperage is too high?

A higher voltage than a device is designed for will most likely blow up some components, but amperage is derived from how much current is actually drawn, based on the device’s resistance, so having “too much” is not a problem and will do no harm.